How To Remove Countertop Backsplash

This is how nosotros easily removed a stone vanity backsplash in just thirty minutes with just 4 simple steps. It's easy! We promise!

You know that short, chubby slab that's oft placed against the wall at the dorsum of a countertop? Plainly, the proper noun for this piece is a vanity backsplash. Who knew? Anyway, every bit nosotros renovated our condo to prep it for sale, we decided that our stacked white tile would expect much, much ameliorate if it extended all the style to the countertop as opposed to the top of the vanity backsplash. This would provide a much cleaner expect and also visually expand the space between the countertop and cabinets. Nosotros knocked this projection out in nigh thirty minutes and were ready to tile shortly later.

Here's what y'all'll need:

• pilus dryer (or heat gun if you accept one)
• utility pocketknife
• composite shims
• hammer or mallet
• modest pry bar (maybe)
• razor scraper

Step ane | Estrus + Score

The offset pace of the process was to aim the pilus dryer (or heat gun) at the backsplash. This helped to soften the adhesive on the back of the stone and make removal easier. While the hair dryer softened the adhesive, we scored the caulk line between the lesser of the backsplash and countertop and the caulk line betwixt the backsplash and drywall. We used a utility knife with a abrupt, fresh blade.

Step 2 | Hammer Shims Behind Backsplash

One time the stone felt warm to the touch (about 2-3 minutes), we gently rocked our blended shims dorsum and forth backside the stone until we constitute an area where nosotros could wedge them gently behind the backsplash. We then tapped the shims with a hammer until we could feel the backsplash pulling away from the drywall.

We connected to tap in additional shims along each section of backsplash until the stone was gently wedged loose from the drywall.

Footstep 3 | Carefully Lift Away Backsplash

With the backsplash separated from the drywall, nosotros reached our fingers behind it and were able to carefully remove it. Nosotros took actress intendance to lift the heavy (!) stone up and away from the countertop surface to avert scratching it.

We worked our way around the kitchen and repeated this simple procedure until all of the vanity backsplashes were removed. If some of the agglutinative patches are very stubborn, the small pry bar may come in handy here, just we found that additional rut and time worked just too. Slow, gentle pressure seemed to be the cardinal to avoid damaging anything.

Step iv | Prep for Paint or Tile

Once all of the stone vanity backsplash sections were removed, we were ready to make clean up the countertop and walls. In society to remove balance caulk and agglutinative, nosotros used a fresh, precipitous razor blade and slid it along the superlative of the countertop.

In our case, the caulk line behind the backsplash was significantly larger, so we repeated the same procedure here to remove the caulk that was left behind.

With a fresh, clean working surface, it was time to tile (merely that's a whole different tutorial). Fast frontward a few days, and this is the end result! We retrieve the countertops were given completely new life by removing the stone vanity backsplash. This allowed the pearly white stacked-bond tile to extend all the way to the countertop surface for a more custom look.

That'due south it! We had no idea what nosotros should wait with this project, but it was truly as simple equally it looked. thirty minutes and a couple of tools that nosotros had on paw and nosotros completely changed the look of this kitchen. Permit us know, are you lot team vanity backsplash, or squad full tile backsplash?

Source: https://www.yellowbrickhome.com/how-to-remove-a-stone-backsplash-in-4-steps/

Posted by: hamlinholifect.blogspot.com

Share this post